Focus 3 RS / ST and Mazda 3 MPS BL Whiteline Front Control Arm Lower Inner Rear Anti-Lift Bushing Kit
Reference: KCA465
-10%
368.58 €
331.72 €
VAT incl.
Secure CheckoutSSL encrypted & safe payment
Authorized DealerOfficial brand distributor
Expert SupportSpecialist advice & fast response
Easy Returns15-day return policy
Buy now, Pay later
For purchases above €50 and below €6,000
This whiteline anti lift kit or front control arm bushing kit for the Focus 3 RS / ST and Mazda 3 MPS BL is a direct bolt on upgrade designed to increase the front axle stiffness. Adding approximately 0.75 degrees of positive caster, the alloy mounts coupled with polyurethane bushes change the front suspension feeling, providing superior traction under hard cornering !
-
Direct bolt on
+0.75 degrees of positive caster
75 duro elastomer bushes (confort version)
Improves Handling
3 years warranty
Hardware included
Instructions included
Made in Australia
- This product is compatible with all these cars -
This whiteline anti lift kit or front control arm bushing kit for the Focus 3 RS / ST and Mazda 3 MPS BL is a direct bolt on upgrade designed to increase the front axle stiffness. Adding approximately 0.75 degrees of positive caster, the alloy mounts coupled with polyurethane bushes change the front suspension feeling, providing superior traction under hard cornering !
-
Direct bolt on
+0.75 degrees of positive caster
75 duro elastomer bushes (confort version)
Improves Handling
3 years warranty
Hardware included
Instructions included
Made in Australia
- This product is compatible with all these cars -
Brand
Model
Type
Version
- Except special mention indicated on the product description -
Ford
Focus
MK3 - 11-18
ST - 250
Ford
Focus
MK3 - 11-18
RS - 350
Mazda
Mazda 3
BL - 09-13
MPS - 260
- Further information -
Our technical specifications and compatibilities refer to the standard equipment of the vehicles mentioned, in case of doubt about the compatibility of a product, please contact our customer service to answer your questions.
Whilteline's bushing kits (W00001 to WZZZZZ, KSK000 to KSKZZZ) are covered for a lifetime, while performance products (BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ, KDT000 to KDTZZZ) are covered for 3 years from purchase. Fitting kits have a 1-year coverage from the original installation date and the all range have exclusions known as coatings and motorsport use, abuse, alterations, incorrect installation, and maintenance. Defective products need to be shipped prepaid to 4 Warringah Close, Somersby, NSW, 2250, with a copy of the original receipt. If covered, the product will be replaced at no cost, except for the expense in claiming the warranty, borne by the purchaser.
No reviews yet
*Write your comment here
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent