Made from high-performance synthetic elastomer, these Whiteline eccentric rear upper control arm inner bushings replace the original rubber components on the Toyota GR Yaris. Their specific design provides a +1° positive rear camber correction, helping to optimise suspension geometry and tyre contact with the road. Stiffer than conventional rubber bushings, they minimise unwanted suspension arm movement under load, improving rear-end stability, handling precision and cornering performance.
-
Direct fit
Set of 2 pieces (left / right)
Camber correction : +1°
Position : inner side of the rear upper control arm
Made in Australia
| Brand | Model | Type | Version |
|---|---|---|---|
| Toyota | Yaris | XP210 - 20-24 | GR - 261/272 |
| Toyota | Yaris | XP210 FL - 24-... | GR - 280/304 |
Made from high-performance synthetic elastomer, these Whiteline eccentric rear upper control arm inner bushings replace the original rubber components on the Toyota GR Yaris. Their specific design provides a +1° positive rear camber correction, helping to optimise suspension geometry and tyre contact with the road. Stiffer than conventional rubber bushings, they minimise unwanted suspension arm movement under load, improving rear-end stability, handling precision and cornering performance.
-
Direct fit
Set of 2 pieces (left / right)
Camber correction : +1°
Position : inner side of the rear upper control arm
Made in Australia
| Brand | Model | Type | Version |
|---|---|---|---|
| Toyota | Yaris | XP210 - 20-24 | GR - 261/272 |
| Toyota | Yaris | XP210 FL - 24-... | GR - 280/304 |
- Further information -
Our technical specifications and compatibilities refer to the standard equipment of the vehicles mentioned, in case of doubt about the compatibility of a product, please contact our customer service to answer your questions.
Content protected by copyright © 2026 - All rights reserved
Whilteline's bushing kits (W00001 to WZZZZZ, KSK000 to KSKZZZ) are covered for a lifetime, while performance products (BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ, KDT000 to KDTZZZ) are covered for 3 years from purchase. Fitting kits have a 1-year coverage from the original installation date and the all range have exclusions known as coatings and motorsport use, abuse, alterations, incorrect installation, and maintenance. Defective products need to be shipped prepaid to 4 Warringah Close, Somersby, NSW, 2250, with a copy of the original receipt. If covered, the product will be replaced at no cost, except for the expense in claiming the warranty, borne by the purchaser.
Toyota Yaris GR Airtec Rear Differential Cooling Duct
Toyota Yaris GR Powerflex Adjustable Front Camber Bolt Kit
Toyota Yaris GR Powerflex Upper Gearbox Mount Insert
No reviews yet
*Leave your review here
