This HKS reinforced cylinder head gasket, intended for the 4G63 engines fitted to the Mitsubishi Lancer Evo 8 / Evo 9, is available as 3 different versions, in order to perfectly suit any type of configuration. The first version with a thickness of 1mm will offer a volumetric ratio of 8.6, the second with 1.2mm a volumetric ratio of 8.5 and finally the third version with a thickness of 1.6mm will lower the volumetric ratio to 8.2.
- Select your version -
Direct mounting
Bore : 86mm
Thickness : 1mm, 1.2mm or 1.6mm to select
Compression ratio: 1mm = 8.6 / 1.2mm = 8.5 / 1.6mm = 8.2
Bead Stopper structure
Made in Japan
| Brand | Model | Type | Version |
|---|---|---|---|
| Mitsubishi | Lancer | Evo 8/9 -03-07 | 2.0T - 265cv / 286cv / FQ |
This HKS reinforced cylinder head gasket, intended for the 4G63 engines fitted to the Mitsubishi Lancer Evo 8 / Evo 9, is available as 3 different versions, in order to perfectly suit any type of configuration. The first version with a thickness of 1mm will offer a volumetric ratio of 8.6, the second with 1.2mm a volumetric ratio of 8.5 and finally the third version with a thickness of 1.6mm will lower the volumetric ratio to 8.2.
- Select your version -
Direct mounting
Bore : 86mm
Thickness : 1mm, 1.2mm or 1.6mm to select
Compression ratio: 1mm = 8.6 / 1.2mm = 8.5 / 1.6mm = 8.2
Bead Stopper structure
Made in Japan
| Brand | Model | Type | Version |
|---|---|---|---|
| - Except special mention indicated on the product description - | |||
| Mitsubishi | Lancer | Evo 8/9 -03-07 | 2.0T - 265cv / 286cv / FQ |
- Further information -
Our technical specifications and compatibilities refer to the standard equipment of the vehicles mentioned, in case of doubt about the compatibility of a product, please contact our customer service to answer your questions.
Content protected by copyright © 2026 - All rights reserved
HKS Fine Tune Upgrade Balancer Belt for Mitsubishi Lancer Evo 8 / Evo 9
HKS Fine Tune Upgrade Timing Belt for Mitsubishi Lancer Evo 8 / Evo 9
Mitsubishi Lancer Evo 8 / Evo 9 ACL Performance Conrod Bearings
No reviews yet
*Write your comment here
No reviews yet
*Write your comment here
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent