APR red coil packs for Audi RS3 8.5V / 8Y and TTRS 8S 2.5 TFSI
The Forge Motorsport Audi RS3 8V / 8.5V intercooler core is a huge 640x250x100mm and of bar and plate design. This gives a huge 87% more surface area than stock, and an even more impressive 133% more volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with the silicone FMKT024 boost hose set if you so wish. Just like on the 8P chassis, Forge Motorsport supplies a specific crash bar modified in order to accept the new larger core, then finish both the crash bar and core in black crackle finish powder coat for maximum longevity.
- Select "with ACC" if your car is adaptive cruise control equiped -
Direct replacement
High quality aluminium made with black finish
Core size 640 x 250 x 100cm - 133% more volume than OEM
Dyno proven gain : +40hp / -34°C intake temp
Specific front crash bar included
Perfect upgrade up to 700hp
Hardware and instructions included
Made in UK
| Brand | Model | Type | Version |
|---|---|---|---|
| Audi | RS3 | 8V - 15-17 | 2.5 TFSI - 367 |
| Audi | RS3 | 8.5V - 17-21 | 2.5 TFSI - 400 |
The Forge Motorsport Audi RS3 8V / 8.5V intercooler core is a huge 640x250x100mm and of bar and plate design. This gives a huge 87% more surface area than stock, and an even more impressive 133% more volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with the silicone FMKT024 boost hose set if you so wish. Just like on the 8P chassis, Forge Motorsport supplies a specific crash bar modified in order to accept the new larger core, then finish both the crash bar and core in black crackle finish powder coat for maximum longevity.
- Select "with ACC" if your car is adaptive cruise control equiped -
Direct replacement
High quality aluminium made with black finish
Core size 640 x 250 x 100cm - 133% more volume than OEM
Dyno proven gain : +40hp / -34°C intake temp
Specific front crash bar included
Perfect upgrade up to 700hp
Hardware and instructions included
Made in UK
| Brand | Model | Type | Version |
|---|---|---|---|
| - Except special mention indicated on the product description - | |||
| Audi | RS3 | 8V - 15-17 | 2.5 TFSI - 367 |
| Audi | RS3 | 8.5V - 17-21 | 2.5 TFSI - 400 |
- Further information -
Our technical specifications and compatibilities refer to the standard equipment of the vehicles mentioned, in case of doubt about the compatibility of a product, please contact our customer service to answer your questions.
Content protected by copyright © 2026 - All rights reserved
No reviews yet
*Write your comment here
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent